A side view mirror is made of 1/8 inch curved chrome mirror properties. This mirror is actually translucent. Meaning that light will travel through and absorb the light from the car behind you at night. USA Dot Standards require this mirror to absorb 40 to 60 percent of light.  We only sell mirrors that conform with DOT standards. Our mirrors are made in the USA. Beware of the 9 dollar mirror that you are seeing on sale these days on the internet, as these mirrors do not conform to USA standards. Car or Truck mirrors should be installed using the car mirror to a plastic frame plate. Without this plastic frame the glass has nothing to rest into the car mirror housing. We do not suggest the use of normal bathroom silicone adhesive, which everyone has laying around at somewhere in their house or apartment. Latex type silicone does adhere well to glass, but does to the plastic frame. We suggested using a construction silicone which is non latex based.  If you don't have any then get a small tube at your local hardware store, or order the tube online with us.

How to remove and replace your car mirror from the frame

Now how do you remove that old mirror to get the new one in. Well, you first must breakdown the mirror from the plate called a frame. One simple way to do this is to get a flat strong instrument like a wide screw driver or a automotive scraper. Not many of you have the scraper, but when you go to our page we could sell you one. Its a nice thing to have around your toolbox. Now to loosen the adhesive from the plate you must apply some heat. Ideally a propane torch is good, but if you have the wife's hairdryer or a heat gun that will also work. Heat up the mirror enough so you can get the screwdriver or the scraper under the mirror and pull all the broken pieces off. Make sure you are wearing gloves and protective eyewear, and after the side view mirror glass is removed, make sure all the mirror and adhesive is clean off the framed plate.

 Many of you have heating elements behind the mirror. Best way to remove the heating element from the car mirror is not to make the mirror too hot. This will melt your heating element. This is the time to use the hair dryer warming up the mirror side, and taking a square utility razor, start at the corner, and slowly peal the element off the mirror. You may be able to save this heating element. Although difficult, TAKE YOUR TIME removing the broken mirror from the heating element which is attached to the mirror using a sticky adhesive. If that stick adhesive is no longer sticky, then use the silicone around the edge of the heating element onto the mirror, let it dry 24 hours then go to the next step.

  Once you have removed your side view mirror from the frame, you now need to , apply the glue to the black frame. Apply the glue outward so it extends past the lip of the frame. I call this the snow cone effect. Glue it in 5 spots. One in the middle and 4 in the middle corners.  Don't get too close to the frames edge, as it will ooze out of the frame, making a mess. So use small dabs of the adhesive 3/8" inch wide by 1/2" outwards. Remember you are not installing a windshield that requires a strong adhesive. Once you have adhered the mirror to the plate, get some easily removable tape, like masking tape, and tape the mirror around the mirror housing so that the mirror will not slide off the frame. This will also allow you to drive. Keep the tape on for 24 hours for cold climates and 5 hours in warm until the glue dries.

Installing a Electrochromatic Self Dimming Fit Over Car mirror.

As previously stated, many car manufactures have created what is known as a self dimming mirror. We do not sell a mirror that self dims. We do however sell mirrors that will fit over your existing self dimming mirror. For more information, please refer to the top of this page. To apply a self dimming mirror is simple. You DO NOT remove the old glass from the frame as these mirror are fused to the frame plate. When buying a self dimming fit over mirror from us, you should do the following. On the old mirror, take the silicone glue, and dot the old mirror every 1/4 x 1/4 inch 1/2 inch from the frames edge. Then take the new mirror place it over the old one, use an easily removable tape, and secure the mirror to the housing for drying. By doing this method, you have created a silicone pad between the two glasses. In many cases even thought the self dimming feature has failed, the heating element behind that mirror will still function, and by transferring the heat through the newly created silicone base onto the new mirror. If you have a self dimming mirror that had liquid come out of the mirror when broken, please clean any oils and dirt from the outer surface and this will prevent the silicone to bond to the plastic. Its best to use a power wash to clean the oil out of the frame.

For more information please click on your Plymouth make of car above where you can order your mirror today. We have almost all car mirrors in stock and ready to ship. If your looking for just the mirror we are the car mirror for cars shopping guide.

We also carry the rear view mirror. Yes this is the one in your car that is usually attached to your windshield using a mirror bracket.  We stock 8" and 10" rearview mirrors, both with break away technology or the old break your nose in an accident screw in type. What is the difference in the two. Well the old type mirror bracket used a small screw that when tightened kept the rear view mirror in place. However due to the increased knowledge through crash tests, researchers found that many people sustained facial damage because the mirror didn't move during the tests. Now instead of a screw they more or less slip onto the mirror button, so that god forbid you get into an accident, the mirror will actually breakaway from the windshield or the headliner attachment. Its a really good safely feature. There however is two drawbacks in that they are much more expensive than the standard screw on type, and the other is that there are special tools required in removing it from the windshield without actually breaking away the bracket or breaking the windshield. So before purchasing this item from us, and the tool needed to remove the old one, you might want the local glass expert for replacement of this item. However if you need the old style, they are rather inexpensive to replace. Its always a good idea to replace the old one that might either be cracked or has some serious oxide breakdown.

This page was specifically built for the following Plymouth car mirrors and Plymouth Truck mirrors.

 Acclaim side view car mirror glass, Arrow side view car mirror glass, Trailduster side view car mirror glass, Arrow Pickup side view car mirror glass, Barracuda side view car mirror glass, Grand Voyager side view car mirror glass, Breeze side view car mirror glass, Voyager side view car mirror glass, Caravelle side view car mirror glass, Champ side view car mirror glass, Conquest side view car mirror glass, Duster side view car mirror glass, Expo side view car mirror glass, Fury side view car mirror glass, Grand Fury side view car mirror glass, Horizon side view car mirror glass, Horizon Custom side view car mirror glass, Lazer side view car mirror glass, Plymouth Limo side view car mirror glass, Limousine side view car mirror glass, Neon side view car mirror glass, Prowler side view car mirror glass, Regent Wagon side view car mirror glass, Reliant side view car mirror glass, Road Runner side view car mirror glass, Salon side view car mirror glass, Salon side view car mirror glass, Satellite side view car mirror glass, Scamp side view car mirror glass, Sebring Plus side view car mirror glass, Sundance Wagon side view car mirror glass, TC3 side view car mirror glass, Turismo side view car mirror glass, Valiant side view car mirror glass, Volare mini van side view car mirror glass