'

"PROUD TO SAY" Made in USA 1st Surface Chromium Automotive Mirror Glass

Volkswagen EOS Side View Car mirror Glass Replacement

Volkswagen Jetta with mirrror that has fallen out of the frame. This was due to glueing the mirror with a spray adhesive against a dual surface mirror property. Yes, You are not the only Jetta customer that this has happen to. Behind the black pad is a heating element. Othe mirrors that do not have this black pad are mirror that did not have a heating element. In that case please click on the link that states, Click here on how to replace your car mirror. However if you have this black pad, which the heating element is behind this pad, you can still have the heating elelmnt funtion properly if you follow the directions at the bottom of this webpage.

Why did my mirror fall off my EOS, and fall out of the frame

Click here for our Instructional YouTube Video

Why my EOS Car Mirror Replacement Glass fell out of the Frame

SPECIAL INSTALLATION INSTRUCTION AT BOTTOM OF THIS PAGE. PLEASE READ

Click here to view how to measure your Car Mirror Replacement Glass

Click here to see our full catalog of mirrors

Have a question or like to place the order by phone, call us at 845-496-2500

2009-2020 Volkswagen EOS Car Mirror Replacement Glass

Non Heated. Heating element behind black pad, not part of the mirror.

 
Year Make Model Drivers Side Mirror Passenger Side Mirror (Mirror is black to show shape of Mirror)

2007-2008 Volkswagen EOS Convertible Car Mirror Replacement Glass

 
 

The following are suggest Items to order along with your car mirror purchase.

Automotive Silicone Adhesive Passenger car Heating element Insurance
 
 
 

 

For further information on reinstalling the Volkswagen EOS Car Mirror Replacement Glass to the Frame, and why your VW EOS mirror fell out of the frame. Please read.

In the last 15 years, we have been selling a lot of mirrors that the glass has fallen out of the frame for no reason. One of the biggest problems cars has been the Volkswagen Passat. There are another 20 or 30 makes and models that has had this problem in recent years. Right now you are seeing a black pad.  The manufacture of this product used a Mylar black pad, to separate the glass from the heating element on your vehicle. Most side view mirrors are glued to the frame that is attached motor using automotive silicone, acrylic glue or urethane. Behind this black pad is a heating element. In the past, many European car manufactures did not use first surface chromium mirror, and those mirrors. which we think was made of aluminum oxide would turn brown due to absorption of the heating element which burns the mirror glass. So they tried to fix the problem, however your mirror was glued to the black Mylar pad using a rubber based spray adhesive.  So a good idea, that now has gone bad.

How to properly Glue this mirror back into the frame.

1. You have to first clean the surface of the black pad. Being contaminated by the previous adhesive, it needs to be removed. We suggest the use of a WET RAG and the use of NAIL POLISH REMOVER to clean any debris, black flakes, and residue. This will insure the automotive silicone that we suggest you use to adhere the mirror to the glass. Nail Polish remover contains 10% acetone which will clean it most efficiently. DO NOT USE ANY FORM OF SCRAPING DEVICE as you will damage the heating element behind the black pad.

2. You now need to glue the mirror to the frame. We sell the silicone for this mirror. You can find it in the additional items to order list. If however you have a non latex silicone (known as construction silicone) then yes,  you can use your product. To help the heating element to function properly, we suggest dotting the black pad with the silicone starting at the center, every 1/4 x 1/4 inch 1/2 inch from the frame edge. When placing the mirror into the frame these small beads of silicone will meet creating a silicone pad for the heat to absorb into the new mirror evenly. Like it did from the factory. The drying time at 70 deg. is 4 hours. Expect longer drying time as temperatures get lower. Do not think of using Crazy Glue, Gorilla glue. However if you are a glass shop or repair facility and have a primer less urethane, this is fine to use.

3. After install, get painters or masking tape, and tape the mirror to the plastic frame you placed the mirror in or to the housing shell.  This will insure that the mirror will not fall out or shift during drying times. We do not recommend driving the car while the glue dries.

We are here to help you. This is a very easy project. Click on our Instructional Vw YouTube Video

 

Hometown Glass Corp/Internet Glass Network,
Processing Office 515 Barberry Ln, PO Box 4625, New Windsor NY 12553 845-496-2500, Fax 845-784-1641
Copyright 2020 [Internet Glass Network, Hometown Auto Glass]. All rights reserved.

www.auto-glass.com , www.internetglassnetwork.com

 We ship to the following destinations.

Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming, AFO, APO, AE, United States Military. Virgin Islands, Canada, Mexico, Puerto Rico, and International World Wide.