Side view Auto Car Replacement Glass Volvo V70
"PROUD TO SAY" Made in USA 1st Surface Chromium Automotive Mirror Glass
Why did this Volvo V70 mirror fall out of the frame, go to bottom of the Page for more Information
Click here for our Instructional YouTube Video
down the order page to complete your order. Fill in the required fields and we
do the rest.
question or like to place the order by phone, call us at 845-496-2500
Click here to view how to measure your Car Mirror Replacement Glass
(Special Directions on how to glue this mirror is at that bottom of this order form)
Click here to see our full catalog of mirrors
For further information on reinstalling the Volvo V70 Car Mirror Replacement Glass that fell out of the Frame, back to the Frame please read this
In the last 15 years, we have been selling a lot of mirrors that the glass has fallen out of the frame for no reason. One of the biggest problems cars has been the Volvo V70. There are another 20 or 30 makes and models that has had this problem in recent years. Right now you are seeing a black pad. The manufacture of this product used a Mylar black pad, to separate the glass from the heating element on your vehicle. Most side view mirrors are glued to the frame that is attached motor using automotive silicone, acrylic glue or urethane. Behind this black pad is a heating element. In the past, many European car manufactures did not use first surface chromium mirror, and those mirrors. which we think is aluminum oxide would turn brown due to absorption of the heating element which burns the mirror glass. So they tried to fix the problem, however your mirror was glued to the black Mylar pad using a rubber based spray adhesive. So a good idea, that now has gone bad.
How to properly Glue this mirror back into the frame.
1. You have to first clean the surface of the black pad. Being contaminated by the previous adhesive, it needs to be removed. We suggest the use of a WET RAG and the use of NAIL POLISH REMOVER to clean any debris, black flakes, and residue. This will insure the automotive silicone that we suggest you use to adhere the mirror to the glass. Nail Polish remover contains 10% acetone which will clean it most efficiently. DO NOT USE ANY FORM OF SCRAPING DEVICE as you will damage the heating element behind the black pad.
2. You now need to glue the mirror to the frame. We sell the silicone for this mirror. You can find it in the additional items to order list. If however you have a non latex silicone (known as construction silicone) then yes, you can use your product. To help the heating element to function properly, we suggestdotting the black pad with the silicone starting at the center, every 1/4 x 1/4 inch 1/2 inch from the frame edge. When placing the mirror into the frame these small beads of silicone will meet creating a silicone pad for the heat to absorb into the new mirror evenly. Like it did from the factory. The drying time at 70 deg. is 4 hours. Expect longer drying time as temperatures get lower. Do not think of using Crazy Glue, Gorilla glue. However if you are a glass shop or repair facility and have a primer less urethane, this is fine to use.
3. After install, get painters or masking tape, and tape the mirror to the plastic frame you placed the mirror in or to the housing shell. This will insure that the mirror will not fall out or shift during drying times. We do not recommend driving the car while the glue dries.
We are here to help you. This is a very easy project. Click here for our Instructional YouTube Video
www.auto-glass.com , www.internetglassnetwork.com